2024年4月13日发(作者：)

积放式小车滚轮铆压工艺流程

英文回答：

The process of riveting the rollers of a trolley in a

stacking manner involves several steps. Let me walk you

through the process.

First, we need to prepare the materials and tools. This

includes the trolley frame, rollers, rivets, a rivet gun,

and a drilling machine. We also need safety equipment such

as gloves and goggles.

Next, we start by drilling holes in the trolley frame

where the rollers will be attached. The size and number of

holes depend on the design and weight-bearing capacity of

the trolley. This step requires precision and accuracy to

ensure the rollers are properly aligned.

Once the holes are drilled, we insert the rollers into

the holes. The rollers are typically made of durable

materials such as steel or nylon to withstand the weight

and movement of the trolley. We make sure the rollers fit

snugly into the holes and do not wobble.

Now comes the riveting process. We place a rivet into

each hole, with the head of the rivet on the outside of the

trolley frame. The rivets are usually made of metal and

come in different sizes to accommodate the thickness of the

trolley frame and rollers.

Using the rivet gun, we apply pressure to the rivets,

causing them to expand and secure the rollers in place.

This process is known as rivet compression. The rivet gun

must be operated carefully to avoid damaging the trolley

frame or rollers.

After all the rivets are compressed, we check the

stability and functionality of the rollers. We test the

trolley by moving it and ensuring the rollers rotate

smoothly and support the weight of the load.

Once we are satisfied with the results, we clean up the

work area and remove any debris or excess materials. The

trolley is now ready for use.

中文回答：

积放式小车滚轮铆压工艺流程涉及几个步骤。让我为您详细介

绍一下这个过程。

首先，我们需要准备材料和工具。这包括小车框架、滚轮、铆

钉、铆接枪和钻床。我们还需要安全设备，如手套和护目镜。

接下来，我们开始在小车框架上钻孔，用于安装滚轮。孔的大

小和数量取决于小车的设计和承重能力。这一步需要精确和准确，

以确保滚轮正确对齐。

一旦钻好孔，我们将滚轮插入孔中。滚轮通常由耐用材料制成，

如钢或尼龙，以承受小车的重量和运动。我们确保滚轮紧密贴合孔

并且不摇晃。

现在是铆接的过程。我们将一个铆钉放入每个孔中，铆钉的头

部位于小车框架的外侧。铆钉通常由金属制成，尺寸不同，以适应

小车框架和滚轮的厚度。

使用铆接枪，我们施加压力于铆钉，使其膨胀并将滚轮固定在

位。这个过程被称为铆接压缩。必须小心操作铆接枪，以避免损坏

小车框架或滚轮。

在所有铆钉被压缩后，我们检查滚轮的稳定性和功能性。我们

通过移动小车并确保滚轮平稳旋转并支撑负载的重量来测试小车。

一旦我们对结果满意，我们清理工作区域并清除任何碎屑或多

余材料。小车现在可以使用了。