2024年4月21日发(作者：数码大师官网)
How to upgrade TP-LINK Wireless N device
Notice:
Please verify the hardware version of your device for the firmware ver
firmware upgrading may damage your device and void the
warranty.
After you downloaded the firmware from TP-LINK website, please use
decompression software such as WinZIP or WinRAR to extract the
firmware file to a folder;
Do NOT upgrade the firmware via wireless connection;
Do NOT turn off the power or cut down the Ethernet cable during
upgrade process;
Please write down all current settings as a backup and enter them
manually after upgrading.
Internet Explorer(IE) is recommended to upgrade the firmware.
Step 1 Log into the TP-LINK device by typing 192.168.0.1 in the address bar of
the web browser (such as Internet Explorer, Firefox). The UserName and
Password are both admin unless you have changed it before.
Step 2 Click System Tools ->Firmware Upgrade, click the Browse button to choose
the firmware you already extracted in the folder.
Step 3 Click the Upgrade button. The device will reboot automatically after the
upgrading has been finished. Please wait about 3 minutes.
Step 4 Click Status, verify that the router’s firmware has been upgraded.
Step 5 It is recommended that restoring the device to factory default to make the new
functions take effect; Click System Tools->Factory Defaults, Click Restore Button.
Step 6 After restoring factory default, please login 192.168.0.1 and re-enter the
settings you have written down before upgrading.
发布者：admin，转转请注明出处：http://www.yc00.com/xitong/1713685914a2298237.html
评论列表（0条）