2024年4月13日发(作者：win10无法连接internet)

乒乓球规则(英文版)

the Rule of Ping-Pong ball

1 table

1.1.1 the upper surface of the table called table games,

should be parallel with the horizontal rectangle, 274 meters

long, 1.525 meters wide, 76 cm high to high ground.

1.1.2 game table does not include the top side of the table.

1.1.3 table games can be made from any material, should have

the same flexibility that is standard when the ball away from

the table down to 30 cm above the table, up to a high of about

23 cm.

1.1.4 table games should be uniform was dark, dull, 2.74

meters along each side of the game together have the edge of

a 2 cm wide white line, 1.525 meters each along the top edge

of each race a 2 cm wide White end line.

1.1.5 table games by the end of a line parallel to the

vertical net is divided into two equal areas of Taiwan, the

Taiwan area as a whole should be a whole area.

1.1.6 doubles, the Taiwan area should be a 3 mm wide white

center line, divided into two equal, "the district and a half."

The center line and parallel to the line and should be seen as

part of the right areas.

Net 1.2 device

1.2.1 net installations, including the net, hanging rope

net, net-chu and fixed them on the stage in the ball part of

the clamp.

1.2.2 should fly ball in the net on a rope, both ends of

the rope line in 15.25 cm high vertical pillar network, the

network of the outer edge of the column away from the outer edge

of the left sideline for the 15.25 cm.

1.2.3 net throughout the game away from the top of the table

15.25 cm.

1.2.4 net as a whole should be close to the bottom of the

table match, the two ends of the column should be close to the

net.

1.3 ball

1.3.1 ball for a ball, with a diameter of 38 mm.

1.3.2 ball weight 2.5 grams.

1.3.3 Application of the ball game Lulu, or similar

material, white, yellow or orange and matte.

1.4 racket

1.4.1 racket size, shape and weight are not limited, but

the floor should be smooth, hard.

1.4.2 thickness of the floor at least 85% of the natural

wood floor to strengthen the bonding layer can be used such as

carbon fiber, fiberglass or compressed paper fiber material,

each layer adhesion does not exceed the total thickness of the

floor, or 7.5% 0.35 mm.

1.4.3 used to hitting the applied side to shoot a layer of

particles out of the ordinary particles plastic cover, together

with the thickness of the adhesive is not more than 2 mm; or

particles inside or outside of the sponge rubber covering,

together with the adhesive, the thickness of non - More than

4 mm.

1.4.3.1 "ordinary plastic particles" is not a bubble of

natural rubber or synthetic rubber, the particles must be not

less than every 10 square centimeters, 50 more than the average

density of the entire surface.