2023年12月8日发(作者：苹果或被强制开放第三方app)
HTC Reliability Specification for Battery Confidential
Test item Condition
4.11 Static loading test
◎External force 3kg is specified to load vertically on
The sag must be
within 0.1mm
the golden finger pad for 20 seconds
4.12 Altitude test
◎Fully charged sample.
◎20 °C ± 3 °C,
◎11.6 kPa for 6 hrs.
◎NL (no leakage)
◎NEL (no visual
evidence of leakage
of electrolyte)
◎NV (no venting)
◎NE (no explosion)
◎NF (no fire)
Criteria
The label must be
recognized.
L1
L2
ΦF
clipCriteria
5 Label reliability test
Test item
5.1 Alcohol test
Condition
◎Rub with a cotton cloth dampened in alcohol（95%
min）
◎Force: 500g
◎Test cycles: 15 times
◎Mack sure the tap(3M #610) totally sticks on the
label. Remove the tap from label at 45 degree.
5.2 Peel Strength test The label must be
recognized.
This specification is subject to change without notice
This confidential document is HTC Corporation property and may not be copied or circulated without permission.
Doc. No. PAS-003 V2.1 Page 17 of 19 2009/05/05
HTC Reliability Specification for Battery Confidential
Test item
5.3 Abrasion resistance
test
5.4 Bar code identify
Condition
◎Total test 1 time.
◎175g, 3 standard cycles
◎Use RCA equipment
1. Alcohol resistance test
2. Peel strength test
Criteria
The label must be
recognized.
1. The label must be
recognized.
2. The bar code must
be scanned.
Without any label
adhere to plate
5.5 Label Storage test
◎Put battery with 100g loading on a plastic
plate(Mitsubishi MB1700PC+ABS)
◎Temperature test condition for 1 cycle:
5.6 Water detector label
◎original: white with red X
◎After water: full red color.
This specification is subject to change without notice
This confidential document is HTC Corporation property and may not be copied or circulated without permission.
Doc. No. PAS-003 V2.1 Page 18 of 19 2009/05/05
发布者：admin，转转请注明出处：http://www.yc00.com/num/1702011338a1167582.html
评论列表（0条）